Cyrusher via YouTube
Go to Source
Tools you need to prepare:m3 hexagonal spanner, pliers
Steps:
0:00 – 0:17 Remove the battery and use the multimeter DC voltage gear to measure the battery positively and negatively (check whether the voltage is normal)
0:18 – 0:21 Pull the wire cover inside the frame by hand to remove the cover.
0:22 – 0:40 Use the m3 hexagonal spanner to remove the three screws fixing the battery base.
0:41 – 1:00 Unplug the power connector between the battery base and the controller.
1:01 – 1:34 Insert the battery base directly into the positive and negative battery terminals and use a multimeter DC voltage file to measure the positive and negative battery base power plug, there is a normal voltage indicating that the battery base is normal.
If you have any other questions, don’t hesitate to get in touch with us：https://www.cyrusher.com/pages/contact
#cyrusher #ebikes #electricbike #howto #fattire #electric #bikeupgrades #battery #batteries #check #cyrushersports
________________
FOLLOW US:
Website:
https://www.cyrusher.com
https://www.cyrusher.tv
Facebook:
https://www.facebook.com/CyrusherBikes
Instagram:
https://www.instagram.com/cyrushersports
Tiktok:
https://www.tiktok.com/@cyrusherbikes