Cyrusher via YouTube
Go to Source
1, m4 hexagonal spanner counterclockwise to remove the brake handle fixed screws, m8 open pipe spanner counterclockwise rotation to loosen the oil pipe and brake handle connection fixed screws, there are cutting pliers to cut off the oil pipe after removing the screws with a transparent tape wrapped around the outside of the cut oil pipe (to prevent the oil pipe in the process of dismantling the oil leakage).
2, m2.5 hexagonal spanner counterclockwise remove the head pipeline plug fixing screws, the key before screwing, remove the battery, m3 hexagonal spanner counterclockwise rotating battery lock, battery base fixing screws, remove the battery lock, battery base, m5 hexagonal spanner counterclockwise rotating brake clamp fixing screws, remove the brake clamps, the fixed brake line all the way to the cable ties with wire cutters to cut off (pay attention to the car cut to the fuel line and other), in the brake clamp position. (Be careful to cut the fuel line and other lines), and pull out the fuel line at the position of the brake clamp. The installation method is reversed.
If you have any other questions, don’t hesitate to get in touch with us：https://www.cyrusher.com/pages/contact
#cyrusher #ebikes #electricbike #howto #fattire #electric #bikeupgrades #battery #batteries #check #cyrushersports
________________
FOLLOW US:
Website:
https://www.cyrusher.com
https://www.cyrusher.tv
Facebook:
https://www.facebook.com/CyrusherBikes
Instagram:
https://www.instagram.com/cyrushersports
Tiktok:
https://www.tiktok.com/@cyrusherbikes