Author: CSC Motorcycles via YouTube
Go to Source
Changing your oil on the CSC RX-3 and RX-4 Adventure Motorcycle https://cscmotorcycles.com/
https://cscmotorcycles.com/rx4-oil-change-tutorial/
https://cscmotorcycles.com/rx3-oil-change/
Parts Needed:
– 2 Quarts of Motorcycle specific oil
– Oil filter (Part# Z18-114) https://cscmotorcycles.com/oil-filter/
– 6 pack of oil filters is also available (Part # CSC-1002) https://cscmotorcycles.com/oil-filter-6-pak-rx3-rc3-rx4/
– The oil filter O-ring is Z18-115 https://cscmotorcycles.com/o-ring-30×2-6/
– The oil screen cap o-rings are Z17-106 and remember you need (2) of them
https://cscmotorcycles.com/o-ring-17-5×1-8-same-as-z18-110/
– The oil screens and O-rings are sold together and is Z17-107, please note that you do not need to replace the screens unless they show damage
https://cscmotorcycles.com/o-ring-17-5×1-8-same-as-z18-110/
– The RX-4 and 2016 and later RX-3 use the same drain plug larger 16mm crush washer the part number is Z17-110A
https://cscmotorcycles.com/washer-16×1-5×20-fits-2016-up-16mm/
– The first model year 2015 RX-3 uses a smaller 14mm crush washer and is Z17-110
https://cscmotorcycles.com/oil-plug-washer/
Tools Needed:
• 8mm wrench or socket
• 17mm wrench or socket
• Ratchet with medium extension
• Small flat screwdriver
• Needle nose plyers
• Magnet
• Clean funnel
• Drain pan
• Large piece of cardboard
• Shop rags
• Solvent or Brake parts cleaner
• Teflon Pipe dope
• Blue Loctite
• Eye protection
• Nitrile gloves