Video by Dirt-E-Bikes via YouTube
Source
This videos sponsor is PCBway and you can get 5$ off your first order if you use this Link:
https://pcbway.com/g/cKBcmd
They are professionals in the manufacture of a wide variety of parts. So you can make your own parts (like the trigger) without having to own the necessary machine.
Printer im using:
Elegoo Neptune 4 Pro – and you can find it here
USA-Shop:
https://shareasale.com/r.cfm?b=2490459&u=4130067&m=104244&urllink=&afftrack=
Europa-Shop:
https://shareasale.com/r.cfm?b=2490460&u=4130067&m=104244&urllink=&afftrack=
Canada-Shop:
https://shareasale.com/r.cfm?b=2545396&u=4130067&m=104244&urllink=&afftrack=
Australia-Shop:
https://shareasale.com/r.cfm?b=2545399&u=4130067&m=104244&urllink=&afftrack=
Elegoo Neptune 4 Pro, on that (affiliate) link you can get it for 279$ (OP is 330$) at the moment, but that may change over time
Patreon:
https://patreon.com/user?u=114885466&utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink
Parts used in this build:
M3 screws:
https://s.click.aliexpress.com/e/_Dl7vIej (check the Manual for which sizes you need)
M3 nuts:
https://s.click.aliexpress.com/e/_DmEmERl
Springs:
https://s.click.aliexpress.com/e/_Dlez4UB (check the Manual which ones you need)
Bow-String:
https://s.click.aliexpress.com/e/_DC5FbiB
https://s.click.aliexpress.com/e/_DewS959 (a bit larger, may work better)
crossbow Darts:
search for 6" crossbow darts on Aliexpress or Amazone, im sorry but all the URLs i tryed to link didnt work.
3D-Parts List:
folding stock:
will be available soon for my patreons
Cocking Lever part:
https://www.printables.com/en/model/514136-adderini-cocking-arm-lever-reinforcement
Handgrip:
https://www.thingiverse.com/thing:4804901
Speedloader:
available for my patreons
– you can find better speedloaders form Lukasch on this website (free):
https://legolini.com/ammo_clip_a.php
Grip Covers:
available for my Patreons
Trigger:
available for my Patreons
Patreon:
https://patreon.com/user?u=114885466&utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink
dont be my Patreon because of these Parts, im not good in 3D designing, so they all need some tweeking and/or post-processing… And the speed Loader needs to be printed on approx. 93% size. i had to print it 4 Times until it was the right fit, even now, its a tight fit and does not go easy when using it…
Anyway, if you want to be my Patreon because you like the content of my videos, thats nice, and i thank you vermy much 🙂
The Adderini 3D-Models you can buy here from Lukasch:
https://legolini.com/adderini_pistol.php
The Build Kit with all the parts needed:
please like and subscribe if this video was usefull for you, it means a lot to me.