Video by Dirt-E-Bikes via YouTube
Source
Thats Part 2 of the series where i show modifications and upgrades on my Elegoo Neptune 4 Pro. This time they need some additional Parts, like screws, rods, T-Nuts etc. Most of the parts should also fit the Neptune 4 Plus and 4 Max (not the sabilizers in this video, but the webcam and many others from part 1), as well as for the Neptune 3 series printer.
This videos sponsor is PCBWay.com
They are professionals in the manufacture of a wide variety of parts. So you can make your own parts without having to own the necessary machine. you can find them on https://www.pcbway.com
The Upgrades video Part 1 is here:
Mods and Upgrades for the Elegoo Neptune (3) / 4 / Pro printer i found on thingyverse and printables.com
Here are all the Links to the Parts i used in this video:
https://www.printables.com/de/model/634124-elegoo-neptune-4-z-axis-stabilizer-v2 – z-axis stabilizer v2 by EntasDisk
https://www.thingiverse.com/thing:5199629/files – Camera mount base by antarias
https://www.thingiverse.com/thing:3017729/files – Extendable Links by giacomo30196
(Set it to 95% size in slicer for the last piece to attache directly to the webcam shown in the video)
Additional parts required for the modifications shown:
Webcam Aliexpress 1080p:
https://a.aliexpress.com/_mOi4MXa
2020 M4 T-slot nuts:
https://a.aliexpress.com/_mMUWmF2
M4 screws:
i used Flat head screws with a length of 10mm and 16mm
M8 nuts:
from your local hardware store, you need 12 for the 3 stabilizers shown in this video, if you build it with 4 stabilizers, you will need 16, if you only build it with 2 – you will need 8…
2 x 100cm M8 threaded rods:
from your local hardware store, you can even use M10 rods for more stability, the stl-Files for the fitting M10-Prints are also here:
https://www.printables.com/de/model/634124-elegoo-neptune-4-z-axis-stabilizer-v2