Video by Rad Power Bikes via YouTube
Go to Source
Follow these instructions to assemble the RadMission electric metro bike. Be sure to perform all safety checks in the owner’s manual including a handlebar twist test, ensuring the front wheel is properly secured, and that all parts are tightened and torqued properly.
Assembly Sections:
00:00 RadMission 1 Assembly
00:20 Photograph Box/Unpack Bike
00:36 Included Hardware
01:32 Recommended Tools
01:45 Rotate Fork, Install Handlebar & Headlight
03:56 Install Pedals
04:33 Adjust Seat Post
05:56 Inflate Tires
06:10 Install Front Wheel
10:20 Front Wheel Safety check
11:19 Check Chain Alignment
11:46 Perform a Handlebar Twist Test
13:29 Final Steps/Additional Resources
14:28 Age Requirement/Helmet/Pre-Ride Safety Check
NOTE: The brake pad spacer at 7:12 is not included with all bikes. It is not needed for the proper assembly or safe operation of the bike. If your bike has one please remove it and recycle it.
Download the latest version of your owner’s manual at https://www.radpowerbikes.com/manual
Get help from a local, reputable bike shop if needed, and contact Rad Power Bikes Product Support if you have any questions.
https://www.radpowerbikes.com/help