Author: BenjaminNelson via YouTube
Go to Source
I melt down brass to cast into the shape of a Trilobite!
Please click SHOW MORE!
I’m a total amateur, and this isn’t even the "correct" equipment for casting, but boy is it neat to be able to do!
Timestamps:
00:00 Intro
00:07 Furnace and Crucible
00:53 1st Casting – Pirate Pistol Butt-Cap
01:23 2nd Casting – Belt Buckle Impression
01:34 3rd Casting – Tiny Gold Bar
02:56 3D Print for Casting
02:53 2-Part Sand Mold
03:05 The POUR!
03:40 Opening the Mold
04:46 Cleaning up the Casting
06:22 Finishing Polish and Patina
07:27 Completed Project
08:01 Conclusion
I melted down some scrap brass and made a Trilobite!
To do this, I started by creating a 3D print. Then I made a two-part sand-mold. The 3D print was covered in sand, which was packed down. The frame was flipped over, covered with baby powder, and then another layer of sand was packed inside an upper wood frame. Then this was pulled off, the 3D print removed, and holes added to pour the molten metal and to let the air out. The frame was reassembled and molten brass was poured into it.
After the casting was cooled, I cut off the extra material and cleaned it up with a grinder and wire wheel.
Then I added a patina with ammonia vapor. Next, I polished the casting with #0000 steel wool so that the high spots were shiny brass, but the low areas kept the dark patina!
I gave this to my sister as a Christmas gift.
I used the following to make this casting.
Vevor 3-Burner Forge: https://amzn.to/3TDoD85
#0 Crucible: https://amzn.to/4890VoR
Here’s a BLOG post about the tiny gold bar – the casting right before this one – which was also made using a 3D print, although in a simple open sand mold.
If you want to see some REAL casting at work, there are all sorts of great videos on the subject on YouTube. The pattern for the trilobite was from Robinson Foundry: https://www.youtube.com/@robinson-foundry
Trilobite STL File: https://www.thingiverse.com/thing:4823569
If you like what I do you can support me at:
https://www.patreon.com/300MPG
By shopping at Amazon anyways: www.amazon.com/shop/benjaminnelson
For more Information, visit:
https://300mpg.org
Most Popular Playlists:
Build Your Own Electric Car: https://bit.ly/2zMufmN
Build Your Own Electric Motorcycle: https://bit.ly/2AT7eOF
Solar Garage: https://bit.ly/2KgQpS5
Contact Ben Nelson:
Please just leave a comment for me at: https://300mpg.org/about/
and I’ll get right back to you.
Music by:
"Late Night Radio" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0/
As an Amazon Associate I earn from qualifying purchases. Amazon links help support this these videos.