SRAM via YouTube
Go to Source
If your brake rotor is rubbing, it may require centering.
1. Use a T25 Torx wrench.
2. Loosen the caliper bolts with a T25 Torx Wrench.
3. Lightly squeeze the brake lever 3 times to advance the brake pads to the rotor.
4. Then hold the lever to center the caliper on the rotor.
5. Tighten the caliper bolts to 5Nm
6. Check that the brake pads are equally spaced on either side of the rotor.
7. Repeat the process and adjust the caliper by hand to center if necessary.
Watch the SRAM How To series → https://youtube.com/playlist?list=PL9DDrMFpBSuyKamCfzFA_VOx-1PDN-eT8
Subscribe to the SRAM channel → @SRAM